|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
DG417L/418L/419L Vishay Siliconix Precision Monolithic Low-Voltage CMOS Analog Switches DESCRIPTION The DG417L/418L/419L are low voltage pin-for-pin compatible companion devices to the industry standard DG417/418/419 with improved performance. Using BiCMOS wafer fabrication technology allows the DG417L/418L/419L to operate on single and dual supplies. Single supply voltage ranges from 3 to 12 V while dual supply operation is recommended with 3 to 6 V. Combining high speed (tON: 28 ns), flat rON over the analog signal range (6 ), minimal insertion lose (up to 100 MHz), and excellent crosstalk and off-isolation performance (- 70 dB at 1 MHz), the DG417L/418L/419L are ideally suited for audio and video signal switching. The DG417L and DG418L respond to opposite control logic as shown in the Truth Table. The DG419L has an SPDT configuration. FEATURES * 2.7- thru 12 V Single Supply or 3- thru 6 Dual Supply * On-Resistance - rON: 14 * Fast Switching - tON: 28 ns - tOFF: 13 ns * TTL, CMOS Compatible * Low Leakage: < 100 pA Pb-free Available RoHS* COMPLIANT APPLICATIONS * * * * * * * Precision Automatic Test Equipment Precision Data Acquisition Communication Systems Battery Powered Systems Computer Peripherals SDSL, DSLAM Audio and Video Signal Routing BENEFITS * * * * Widest Dynamic Range Low Signal Errors and Distortion Break-Before-Make Switching Action Simple Interfacing FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG417L/DG418L Dual-In-Line, MSOP-8 and SOIC-8 NC/NO * GND V+ 1 2 3 4 Top View *Not Connected 8 7 6 5 COM VIN VL DG419L Dual-In-Line, MSOP-8 and SOIC-8 COM NC GND V+ 1 2 3 4 Top View 8 7 6 5 NO VIN VL TRUTH TABLE Logic 0 1 DG417L ON OFF DG418L OFF ON TRUTH TABLE - DG419L Logic 0 1 NC ON OFF NO OFF ON ORDERING INFORMATION DG417L/418L Temp Range Package Part Number DG417LDY DG417LDY-E3 DG417LDY-T1 DG417LDY-T1-E3 DG418LDY DG418LDY-E3 DG418LDY-T1 DG418LDY-T1-E3 DG417LDQ-T1-E3 DG418LDQ-T1-E3 ORDERING INFORMATION DG419L Temp Range Package 8-Pin Narrow SOIC 8-Pin MSOP Part Number DG419LDY DG419LDY-E3 DG419LDY-T1 DG419LDY-T1-E3 DG419LDQ-T1-E3 - 40 to 85 C 8-Pin Narrow SOIC 8-Pin MSOP * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 71763 S-71009-Rev. E, 14-May-07 www.vishay.com 1 DG417L/418L/419L Vishay Siliconix ABSOLUTE MAXIMUM RATINGS Parameter V+ to VGND to VVL IN, COM, NC, NO a Limit - 0.3 to 13 7 (GND - 0.3) to (V+) + 0.3 - 0.3 to (V+ + 0.3) or 30 mA, whichever occurs first 30 100 - 65 to 150 320 400 600 Unit V Continuous Current (Any Terminal) Peak Current, S or D (Pulsed 1 ms, 10 % Duty Cycle) Storage Temperature (AK, DQ, DY Suffix) Power Dissipation (Packages)b 8-Pin MSOPc 8-Pin SOICc 8-Pin CerDIPd mA C mW Notes: a. Signals on NC, NO, COM, or IN exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC Board. c. Derate 6.5 mW/C above 25 C. d. Derate 12 mW/C above 75 C. SPECIFICATIONS (SINGLE SUPPLY 12 V) Test Conditions Unless Otherwise Specified V+ = 12 V, V- = 0 V VL = 5 V, VIN = 2.4 V, 0.8 Vf A Suffix Limits D Suffix Limits - 55 to 125 C - 40 to 85 C Tempb Full V+ = 10.8 V, V- = 0 V INO, INC = 5 mA, VCOM = 2/9 V VCOM = 1/11 V VNO, VNC = 11/1 V VNO, VNC = VCOM = 11/1 V Room Full Room Full Room Full Room Full Full Room Full Room Full Room Room Room Room Room Room Room Full Room Full Room Full Room Full 0.01 28 13 13 1 - 71 - 71 5 15 0.02 - 0.002 0.002 - 0.002 -1 - 7.5 -1 - 7.5 1 7.5 -1 -5 1 7.5 -1 -5 1 5 1 5 A pC dB 13 -1 - 15 -1 - 15 -1 - 15 - 1.5 Typc Mind 0 Maxd 12 20 32 1 15 1 15 1 15 1.5 43 50 31 35 -1 - 10 -1 - 10 -1 - 10 -1 Mind 0 Maxd 12 20 23.5 1 10 1 10 1 10 1 43 46 31 32 A nA Unit V Parameter Analog Switch Analog Signal Rangee On-Resistance Symbol VANALOG rON INO(off) INC(off) ICOM(off) Switch Off Leakage Current Channel On Leakage Current Digital Control Input Current Dynamic Characteristics Turn-On Time Turn-Off Time Break-Before-Make Time Delay Charge Injectione Off-Isolatione Channel-to-Channel Crosstalke Source Off Capacitancee Channel-On Capacitancee Power Supplies Positive Supply Current Negative Supply Current Logic Supply Current Ground Current ICOM(on) IINL or IINH tON tOFF tD QINJ OIRR XTALK CNO(off) CNC(off) CON I+ IVIN = 0 or VL IL IGND RL = 300 , CL = 35 pF VNO, VNC = 5 V, See Figure 2 DG419L Only, VNC, VNO = 5 V RL = 300 , CL = 35 pF Vg = 0 V, Rg = 0 , CL = 1 nF RL = 50 , CL = 5 pF , f = 1 MHz ns VIN = 0 or V+, f = 1 MHz pF www.vishay.com 2 Document Number: 71763 S-71009-Rev. E, 14-May-07 DG417L/418L/419L Vishay Siliconix SPECIFICATIONS (DUAL SUPPLY 5 V) Test Conditions Unless Otherwise Specified V+ = 5 V, V- = - 5 V VL = 5 V, VIN = 2.4 V, 0.8 Vf A Suffix Limits - 55 to 125 C Tempb Full V+ = 5 V, V- = - 5 V INO, INC = 5 mA, VCOM = 3.5 V V+ = 5.5 , V- = - 5.5 V VCOM = 4.5 V VNO, VNC = 4.5 V V+ = 5.5 V, V- = - 5.5 V VNO, VNC = VCOM = 4.5 V Room Full Room Full Room Full Room Full Full Room Full Room Full Room Room Room Room RL = 50 , CL = 5 pF , f = 1 MHz Room Room Room Room Full VIN = 0 or VL Logic Supply Currente Ground Currente IL IGND Room Full Room Full Room Full 0.05 30 16 10 33 3 - 71 - 76 5.2 15 0.03 - 0.002 0.002 - 0.002 -1 - 7.5 -1 - 7.5 1 7.5 -1 -5 1 7.5 -1 -5 1 5 1 5 A dB 47 47 pC 14 -1 - 15 -1 - 15 -1 - 15 - 1.5 Typc Mind Maxd D Suffix Limits - 40 to 85 C Mind Maxd Unit V Parameter Analog Switch Analog Signal Rangee On-Resistance Symbol VANALOG rON INO(off) INC(off) ICOM(off) ICOM(on) -5 5 18.5 30 1 15 1 15 1 15 1.5 41 50 32 36 -5 5 18.5 21 Switch Off Leakage Currenta Channel On Leakage Currenta Digital Control Input Currenta Dynamic Characteristics Turn-On Timee Turn-Off Timee Break-Before-Make Time Delaye TransitionTime Charge Injectione Off-Isolatione Channel-to-Channel Crosstalke Source Off Capacitancee Channel-On Capacitancee Power Supplies Positive Supply Currente Negative Supply Currente -1 - 10 -1 - 10 -1 - 10 -1 1 10 1 10 1 10 1 41 44 32 33 ns A nA IINL or IINH tON tOFF tD tTRANS QINJ OIRR XTALK CNO(off) CNC(off) CON RL = 300 , CL = 35 pF VNO, VNC = 3.5 V, See Figure 2 DG419L Only, VNO, VNC = 3.5 V RL = 300 , CL = 35 pF RL = 300 , CL = 35 pF VS1 = 3.5 V, VS2 = 3.5 V Vg = 0 V, Rg = 0 , CL = 1 nF f = 1 MHz pF I+ I- Document Number: 71763 S-71009-Rev. E, 14-May-07 www.vishay.com 3 DG417L/418L/419L Vishay Siliconix SPECIFICATIONS (SINGLE SUPPLY 5 V) Test Conditions Unless Otherwise Specified V+ = 5 V, V- = 0 V VL = 5 V, VIN = 2.4 V, 0.8 Vf A Suffix Limits - 55 to 125 C Tempb Full V+ = 4.5 V, INO, INC = 5 mA VCOM = 1 V, 3.5 V Room Full Room Full Room Full Room Room Room Full VIN = 0 or VL Logic Supply Currente Ground Currente IL IGND Room Full Room Full Room Full 26 Typc Mind Maxd 5 36.5 50 49 60 31 35 D Suffix Limits - 40 to 85 C Mind Maxd 5 36.5 40.5 49 54 31 32 ns Unit V Parameter Analog Switch Analog Signal Rangee On-Resistancee Dynamic Characteristics Turn-On Timee Turn-Off Timee Break-Before-Make Time Delaye Charge Injectione Power Supplies Positive Supply Currente Negative Supply Currente Symbol VANALOG rON tON tOFF tD QINJ RL = 300 , CL = 35 pF VNO, VNC = 3.5 V, See Figure 2 DG419L Only, VNO, VNC = 3.5 V RL = 300 , CL = 35 pF Vg = 0 V, Rg = 0 , CL = 1 nF 37 16 19 0.4 0.02 - 0.002 0.002 - 0.002 -1 - 7.5 -1 - 7.5 pC 1 7.5 -1 -5 1 7.5 -1 -5 1 5 1 5 A I+ I- www.vishay.com 4 Document Number: 71763 S-71009-Rev. E, 14-May-07 DG417L/418L/419L Vishay Siliconix SPECIFICATIONS (SINGLE SUPPLY 3 V) Test Conditions Unless Otherwise Specified V+ = 3 V, V- = 0 V VL = 3 V, VIN = 2.0 V, 0.4 Vf A Suffix Limits - 55 to 125 C Tempb Full V+ = 2.7 V, V- = 0 V Room INO, INC = 5 mA, VCOM = 0.5, 2.2 V Full V+ = 3.3 , V- = 0 V VCOM = 1, 2 V, VNO, VNC = 2, 1 V V+ = 3.3 V, V- = 0 V VNO, VNC = VCOM = 1, 2 V Room Full Room Full Room Full Full Room Full Room Full Room Room Room RL = 50 , CL = 5 pF , f = 1 MHz Room Room Room 0.005 65 26 33 1 - 71 - 77 5.6 16 dB pC 47 -1 - 15 -1 - 15 -1 - 15 - 1.5 Typc Mind Maxd D Suffix Limits - 40 to 85 C Mind Maxd Unit V Parameter Analog Switch Analog Signal Rangee On-Resistance Symbol VANALOG rON INO(off) INC(off) ICOM(off) ICOM(on) 0 3 70 80 1 15 1 15 1 15 1.5 75 95 41 45 0 3 70 75 Switch Off Leakage Currenta Channel On Leakage Currenta Digital Control Input Currenta Dynamic Characteristics Turn-On Time Turn-Off Time Break-Before-Make Time Delay Charge Injectione Off-Isolatione Channel-to-Channel Crosstalke Source Off Capacitancee Channel On Capacitancee -1 - 10 -1 - 10 -1 - 10 -1 1 10 1 10 1 10 1 75 85 41 43 ns A nA IINL or IINH tON tOFF tD QINJ OIRR XTALK CNO(off) CNC(off) CD(on) RL = 300 , CL = 35 pF VNO, VNC = 1.5 V, See Figure 2 DG419L Only, VNO, VNC = 1.5 V RL = 300 , CL = 35 pF Vg = 0 V, Rg = 0 , CL = 10 nF f = 1 MHz pF Notes: a. Leakage parameters are guaranteed by worst case test condition and not subject to production test. b. Room = 25 C, Full = as determined by the operating temperature suffix. c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. e. Guaranteed by design, not subject to production test. f. VIN = input voltage to perform proper function. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Document Number: 71763 S-71009-Rev. E, 14-May-07 www.vishay.com 5 DG417L/418L/419L Vishay Siliconix TYPICAL CHARACTERISTICS 25 C, unless otherwise noted 60 T = 25 C IS = 5 mA r ON - On-Resistance () V+ = 2.7 V 80 70 60 A 50 40 30 20 10 0 0 3 6 9 12 VCOM - Analog Voltage (V) 0 0 1 2 3 4 5 VCOM - Analog Voltage (V) E D B C A B C D E IS = 5 mA V+ = 2.7 V A = 125 C B = 85 C C = 25 C D = - 40 C E = - 55 C V+ = 4.5 V 50 r ON - On-Resistance () 40 30 V+ = 4.5 V 20 V+ = 10.8 V 10 rON vs. VCOM and Supply Voltage 30 V = 5V IS = 5 mA I+ - Supply Current (nA) 10000 rON vs. Analog Voltage and Temperature 25 r ON - On-Resistance () V=5V VIN = 0 V 20 125 C 85 C 25 C - 40 C - 55 C 15 1000 10 5 0 -5 -3 -1 1 3 5 100 - 55 - 35 - 15 5 25 45 65 85 105 125 VCOM - Analog Voltage (V) Temperature (C) rON vs. Analog Voltage and Temperature 10 m 1m I+ - Supply Current (nA) 100 10 1 100 n 10 n 1 10 1 - 55 1000 Leakage Current (pA) 10000 Supply Current vs. Temperature V+ = 12 V V- = 0 V 100 ICOM(on) ICOM(off) 10 100 1K 10 K 100 K 1M 10 M - 35 - 15 5 25 45 65 85 105 125 Input Switching Frequency (Hz) Temperature (C) Supply Current vs. Input Switching Frequency Leakage Current vs. Temperature www.vishay.com 6 Document Number: 71763 S-71009-Rev. E, 14-May-07 DG417L/418L/419L Vishay Siliconix TYPICAL CHARACTERISTICS 25 C, unless otherwise noted 40 V+ = 12 V V- = 0 V Leakage Current (pA) 20 ICOM(off)/ICOM(on) 0 INO(off)/INC(on) t ON , t OFF - Switching Time (ns) 90 80 70 60 50 40 30 20 10 - 40 0 2 4 6 8 10 12 VCOM, VNO, VNC - Analog Voltage (V) 0 - 55 tON V+ = 5 V tON V+ = 12 V tOFF V+ = 5 V tOFF V+ = 3 V tON V+ = 3 V - 20 tOFF V+ = 12 V - 35 - 15 5 25 45 65 85 105 125 Temperature (C) Leakage vs. Analog Voltage Switching Time vs. Temperature and Single Supply Voltage 10 Loss - 10 80 70 t ON , t OFF - Switching Time (ns) 60 50 40 30 20 10 0 - 55 - 35 tOFF V+ = 6 V - 15 5 25 45 65 tOFF V+ = 5 V 85 105 125 tON V+ = 3 V Loss, OIRR, X TALK (dB) - 30 tON V+ = 5 V tON V+ = 6 V tOFF V+ = 3 V - 50 OIRR V+ = 3 V V- = 0 V RL = 50 - 70 - 90 - 110 0.1 1 10 Frequency (Hz) 100 1000 Temperature (C) Switching Time vs. Temperature and Dual Supply Voltage 2.0 1.8 VT - Switching Threshold (V) 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 2.0 VL = V+ Q - Charge Injection (pC) 12 10 8 6 4 2 0 -2 -4 -6 -8 - 10 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 - 12 -6 -4 Insertion Loss, Off -Isolation Crosstalk vs. Frequency V+ = 12 V V+ = 5 V V= 5V V+ = 3 V -2 0 2 4 6 8 10 12 V+ - Supply Voltage (V) VCOM - Analog Voltage (V) Switching Threshold vs. Supply Voltage Charge Injection vs. Analog Voltage) Document Number: 71763 S-71009-Rev. E, 14-May-07 www.vishay.com 7 DG417L/418L/419L Vishay Siliconix SCHEMATIC DIAGRAM (TYPICAL CHANNEL) V+ S VL VVIN Level Shift/ Drive V+ GND D V- Figure 1. TEST CIRCUITS VL V+ Logic Input Switch Output VOUT RL 300 CL 35 pF VOUT 90 % tr < 5 ns tf < 5 ns tOFF VINH VINL 50 % Switch Input VIN VL NO or NC IN GND V+ COM 0.9 x VOUT V- Switch Output 0V tON VCL (includes fixture and stray capacitance) VOUT = VIN RL RL + rON Note: Logic input waveform is inverted for switches that have the opposite logic sense control Figure 2. Switching Time VL V+ Logic Input VO RL 300 CL 35 pF VINH VINL tr < 5 ns tf < 5 ns VL VNO VNC NO NC IN GND V+ COM VNC = VNO VO Switch Output 0V 90 % V- tD tD VCL (includes fixture and stray capacitance) Figure 3. Break-Before-Make (DG419L) www.vishay.com 8 Document Number: 71763 S-71009-Rev. E, 14-May-07 DG417L/418L/419L Vishay Siliconix TEST CIRCUITS +5V VL NO or NC VS1 VS2 NC or NO RL 300 VCL 35 pF VS1 V01 Switch Output VS2 V02 10 % 90 % V+ COM VO Logic VINH Input VINL 50 % + 15 V tr < 5 ns tf < 5 ns tTRANS tTRANS IN GND VCL (includes fixture and stray capacitance) VO = VS RL RL + rON Figure 4. Transition Time (DG419L) VL V+ VO VO Rg VL COM IN GND V+ NO or NC CL 1 nF VVO IN OFF ON OFF Vg Q = VO x CL IN dependent on switch configuration Input polarity determined by sense of switch. VVIN = 0 - V+ Figure 5. Charge Injection VL C VL VS Rg = 50 IN 0 V or 2.4 V NC or NO VOUT VIN NO or NC COM C V+ V+ 50 GND VOUT VIN V- C XTA LK Isolation = 20 log C = RF bypass V- Figure 6. Crosstalk (DG419L) Document Number: 71763 S-71009-Rev. E, 14-May-07 www.vishay.com 9 DG417L/418L/419L Vishay Siliconix TEST CIRCUITS VL C V+ C NO or NC Rg = 50 IN 0 V, 2.4 V GND COM RL 50 VC VOff Isolation = 20 log C = RF Bypass VCOM VNO/NC Figure 7. Off Isolation VL C VL V+ C V+ COM Meter IN 0 V, 2.4 V NO or NC GND VC HP4192A Impedance Analyzer or Equivalent f = 1 MHz V- Figure 8. Source/Drain Capacitances Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see http://www.vishay.com/ppg?71763. www.vishay.com 10 Document Number: 71763 S-71009-Rev. E, 14-May-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of DG417L08 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |